HARNESSESGemtor full-body harnesses distribute the forces generated during a fall over at least the thighs, pelvis, chest, and shoulders. The standard sliding back D-ring helps to suspend a fallen worker in an upright position after the fall.
•
ROPE & CABLE GRABSSmall, lightweight rope-grabbing devices ride a vertical lifeline and automatically lock in place if a fall occurs.
•
ROPE LANYARDS & LIFELINESThe selection of your lanyard is as important as the proper selection of your body belt or full-body harness. Lanyards should be kept as short as possible to reduce the possibility of serious injury. OSHA mandates that free fall distances not exceed 6'.
•
ENERGY ABSORBERS LANYARDSGemtor, Inc. recommends that an energy/shock absorber be used whenever the possibility of a free fall exists to assure that forces are below the OSHA limits.
•
WEB LANYARDSWeb lanyards are not appropriate for fall arrest unless used as part of a .fall arrest system incorporating an energy absorbing component.
•
SELF RETRACTING LIFELINESGemtor self-retracting lifelines and lanyards automatically extend and retract permitting a worker freedom of movement while preventing slack line and providing continuous protection against falls.
•
GEMTOR LADDER CLIMBER'S SAFETY SYSTEMDesigned for installation on fixed, permanent ladders of virtually any height, Gemtor ladder climber’s safety systems feature a safety sleeve that automatically follows the ascending and descending movements of a worker along a fixed ladder. If a slip or fall occurs, a locking mechanism engages, limiting the fall to a few inches and reducing the possibility of serious injury.
•
RETRIEVAL SYSTEMSGemtor complete non-entry confined space retrieval systems come complete with everything you need to enter a vertical confined space with an acceptable means of access, except a full-body harness which should be selected based on application needs and user preferences.
•
HORIZONTAL LIFELINESGemtor Horizontal Lifeline Systems are engineered to provide a temporary OSHA-compliant anchorage point when no overhead anchorage exists or when a worker needs the ability to move across a horizontal surface while tied off.
•
ANCHORAGE CONNECTORSGemtor anchor slings provide an OSHA-compliant anchor point when attached to a
structural support capable of supporting at least 5,000 lbs. The anchor slings are made of 1 3/4" wide nylon webbing (polyester is also available) with a 3" wide wear pad to protect against abrasion.
•
ROPE LADDERS2" wide x 1" thick x 15" long oval shaped hardwood rungs. Side rails may be ordered in 5/8" diameter nylon, polyester, poly-blend, or HSP rope. Side rails pass through and are secured to rungs using steel drive pins. Rungs are spaced 12" apart. Ladders come standard with 5' tie-down lines.
•
SIZING CHARTPlease review the sizing Charts for proper fit of your Gemtor Harnesses. Any Questions please feel free to contact Metro Supply @ 908-241-0362 for Help and more information.