Search by Keyword
Shopping Cart
Items: 0
Subtotal: $0.00
Note: All prices in US Dollars










Delivery Available
 

Yoke Lifting Equipment & Rigging Supply



Yoke Rigging and Lifting Hardware

Yoke has been successfully manufacturing wire rope assemblies for over 30 years. We are specialists who have produced assemblies for countless applications. Our shop is equipped to handle the simple or the complex, from 1/32” to 1/2" wire rope. Our testing and quality control has been surveyed and approved by the U.S. Department of Defense, aerospace contractors and commercial OEMs throughout the United States.


Grade 100 FittingsGrade 100 Fittings

Grade 100 Chain Fittings

Master Links, Connecting Links, Hooks, etc.
LinksLinks

Yoke Links

There is a very complete product range concerning Grade 80 fittings. This includes not only fittings for chain but also fittings for wire rope and webbing slings. It also includes a number of fittings in large size - 26mm and 32mm - unavailable elsewhere.
Clevis HooksClevis Hooks

Yoke Clevis Hooks

There is a very complete product range concerning Grade 80 fittings. This includes not only fittings for chain but also fittings for wire rope and webbing slings. It also includes a number of fittings in large size - 26mm and 32mm - unavailable elsewhere.
Eye HooksEye Hooks

Yoke Eye Hooks

There is a very complete product range concerning Grade 80 fittings. This includes not only fittings for chain but also fittings for wire rope and webbing slings. It also includes a number of fittings in large size - 26mm and 32mm - unavailable elsewhere.
Swivel HooksSwivel Hooks

Yoke Swivel Hooks

There is a very complete product range concerning Grade 80 fittings. This includes not only fittings for chain but also fittings for wire rope and webbing slings. It also includes a number of fittings in large size - 26mm and 32mm - unavailable elsewhere.
Hoist Rings, Lifting Points, Tie DownsHoist Rings, Lifting Points, Tie DownsYoke Hoist Rings, Lifting Points, Tie Downs
Misc. Grade 80 Lifting FittingsMisc. Grade 80 Lifting Fittings

Yoke Misc. Grade 80 Lifting Fittings

Grade 80 Web Sling FittingsGrade 80 Web Sling FittingsYoke Grade 80 Web Sling Fittings
Grade 80 Clutch FittingsGrade 80 Clutch FittingsYoke Grade 80 Clutch Fittings
Eye SwivelsEye Swivels

Yoke Eye Swivels

Grade 80 Fitting -  Please review, and call if you need additional infomation.
Chain Choices (LaClede)Chain Choices (LaClede)Chain Choices
YOKE INSULATED SWIVELSYOKE INSULATED SWIVELS

Yoke Insulated Swivels

Most popular Configurations enclosed. Any combination available. Please review, and call if you need additional infomation.
Contact Angular SwivelsContact Angular SwivelsYoke Contact Angular Swivels
.75 Ton - 35 Ton Working Load Limit (WLL) Complete line with all Configurations to meet all your special Rigging requirerments. Please call if you have any questions.
Forged ShacklesForged ShacklesYoke Forged Shackles
Shackles are Type Approved by DNV & ABS. Shackles are forged alloy/carbon steel with alloy/carbon pin. Size and Working Load Limit permanently shown on each shackle. All shackles with Batch Code which links to Test Certificate and quality traceability. 100% magnaflux crack detection during maunfacturing. Fatigue rated.
Wire Rope Sockets & SleevesWire Rope Sockets & SleevesYoke Wire Rope Sockets & Sleeves
Snatch BlocksSnatch BlocksYoke Snatch Blocks
YOKE Blocks are manufactured from the highest quality tensile steel. Available from 2 Ton to 20 Ton / 5/16" thru 1 1/8" Wire Rope. Please review enclosed, any questions Please call.


Since the beginning of time man has been lifting and moving objects to try to make his life more easier…. The art of lifting and moving things larger and heavier then ones self can be a very dangerous and complicated thing … What’s been come to be known as rigging today has certainly changed from when we first started… And so has the rigging equipment that we use today. Yoke Lifting and Rigging equipment offer a wide verity of Chain Fittings, Wire Rope Fittings, Swivels, Shackles and Blocks.

Industrial Rigging Equipment


From raw materials to the completed product, Yoke products are tested to achieve the highest standards in the industry including rigorous testing in the following areas:
  • Proper and top quality raw materials.
  • Inspected chain components to detect any irregularities after heat treatment.
  • Individually inspected and tested load pins.
  • Ultrasonic detection to avoid any internal cracking. 
  • Proof load tested at 2.5 times the working load limits
  • Dynamic Fatigue Tested at 1.5 times the working load limit for 20,000 cycles.
  • Ultimate break load test to ultimate failure (min. of 4 times the working load & up to 6 times based on the item).
All lifting equipment and hardware should be inspected at least once every six months for any signs of wear and tear. Without proper equipment, loads may slip, fall, seriously injure, or even cause work-related fatalities.

Although yoke links and lifting hardware can be more expensive than traditional eyebolts, the benefits are innumerable and definitely outweigh the initial investment. When considering the value of the machinery they are used to lift, and the risk to employees, safety is of the upmost importance.

Quality Control, Testing, and
Detecting during manufacturing

YOKE Industrial Corp. runs a state of the art production facility with contact and strict quality control in every stage of the manufacturing process from raw materials to the completed product. All YOKE lifting products are tested in accordance with EN 1677 and achieve H91 certification by BG Germany. YOKE is an ISO 9001 certified company and has type approval by the main international authorities from SABS, ZU, ABS, and DNV. YOKE has achieved CNLA certification--Chinese National Laboratory Accreditation which ensures a quality research and development (R&D) department and unsurpassed product engineering.

  • Spectrographic Analysis :
    To assure the proper metallurgy content of all raw materials.
  • Magnaflux Crack Detection :
    All forged chain components are each individually magnafluxed to detect any irregularities after heat treatment.
  • Eddy Current Detection :
    All load pins are 100% individually inspected and tested after heat treatment.
  • Ultrasonic Detection :
    Forged Hooks or Links size 22mm or larger, have ultrasonic detection to avoid any internal cracking. Certificate available upon request.
  • Manufacturing Proof Load Test :
    All chain and components are proof load tested at 2.5 times the working load limits with resultant permanent deformation within 1%.
  • Dynamic Fatigue Testing :
    Batch samples of chain and components are Dynamic Fatigue Tested at 1.5 times the working load limit for 20,000 cycles.
  • Ultimate Breaking Load Test :
    Batch samples of Chain and Components are break load tested in a static tensile testing machine to ultimate failure. The minimum ultimate break force is equal to the Working Load Limit times the safety factor, (a minimum of 4 times the working load and up to 6 times based on the item).   

Welcome  ·  About Us  ·  Contact Us  ·  Shipping  ·  Privacy Policy  ·  Sitemap
Copyright © Metro Industrial Supply, LLC | Keyport, New Jersey 
Toll-Free 866-601-5552 / Fax 866-478-2110
info@metrosupplyllc.com